Write an intro paragraph about how to protect the wall behind the dartboard including an attention-getting first sentence. use a teaser sentence or two about the content that is to follow.
If you’re an avid dart player, chances are you’ve experienced the unfortunate reality of a missed throw and a resulting hole in your wall. But there’s no need to worry – there are several ways to protect your wall and keep your game going strong. First, you should decide if you are going on the DIY approach, or the “shut-up and take my money” approach.
Here are the most common ways to protect your wall in both ways:
Dartboard wall protector – DIY:
- Hang a blanket or towel behind your dartboard. This is probably the easiest way to protect your wall, and it will also help to deaden the sound of darts hitting the wall. Just make sure that the blanket is securely fastened so that it doesn’t get in the way of your throws.
- Use a cork board as a backing for your dartboard. This will give you a much sturdier surface to throw at, and it will also protect your wall from errant darts. You can find cork boards at most hardware stores.
- Build a frame around your dartboard. This is a bit more involved than the other options, but it will give you a nice, finished look. Plus, you can add some padding to the frame to further protect your wall.
Done For You (Paid):
- Buy a pre-made dartboard cabinet. These cabinets are designed specifically to protect your wall from darts, and they come in a variety of styles to match your décor.
- Get an electronic dartboard. These boards don’t use actual darts, so there’s no risk of damaging your walls (Plus, they’re tons of fun!). Most of these new models give you more versatility, and additional features like lights and sounds that make playing darts even more pleasurable. Usually, the price of an electronic dartboard also includes a set of soft-tip darts.
- Use Dart Boards with Soft Tips. These tips are made of soft materials like rubber or cork, so they won’t damage your walls even if you miss the board entirely.
How to make a dartboard backboard?
If you choose to Use a corkboard or bulletin board as your backboard, you will need the following supplies:
-Corkboard or bulletin board
-Measuring tape
-Level
-Scissors or a box cutter
-Strong adhesives like Gorilla Glue or duct tape
-Painter’s Tape (optional)
Follow these steps:
- Measure the area where you want to place your backboard. Add two inches to each side to allow for overhang. For example, if your dartboard is 18 inches wide, you will want your backboard to be 22 inches wide.
- Cut your corkboard or bulletin board to size using scissors or a box cutter.
- Place the board on the wall and use painter’s tape to mark where the top and bottom edges will fall. This will help you keep the board level when you attach it to the wall.
- Use a level to make sure the board is straight, then remove it from the wall.
- Apply a generous amount of adhesive to the back of the board, making sure to cover all edges evenly.
- Place the board on the wall and press it firmly into place. Use painter’s tape to hold it in place until the adhesive dries (follow manufacturer’s instructions for drying time).
- Remove the painter’s tape and enjoy your new backboard!
If you choose to Build a frame around your dartboard, you will need the following supplies:
-1×2 lumber (enough to build a frame around your dartboard)
-Measuring tape
-Carpentry square or a level
-Saw (hand saw, miter saw, or jigsaw)
-Drill
-1 inch hole saw
-Paint or stain (optional)
Follow these steps:
- Measure the area where you want to place your frame. Add two inches to each side to allow for overhang. For example, if your dartboard is 18 inches wide, you will want your frame to be 22 inches wide.
- Cut your lumber to size using a saw. If you are using a hand saw, it may be helpful to use a miter box to get clean, straight cuts.
- Assemble your frame using the drill and screws. You may want to use L-brackets or corner braces to reinforce the corners of your frame.
- Once your frame is assembled, use the hole saw to cut a hole in the center for your dartboard.
- Paint or stain your frame, if desired. Allow the paint or stain to dry completely before continuing.
- Attach your frame to the wall using the strong adhesive, following the manufacturer’s instructions for drying time.
- Place your dartboard in the center of the frame and enjoy!
When making your own dartboard wall protector, it is important to be aware of potential safety hazards. If you are not familiar with carpentry or electrical work, it is best to seek professional assistance. Improperly installed backboards or frames can cause serious injury if they fall off the wall. Make sure to follow all instructions carefully and consult a professional if you have any questions.
There you have it! Now you know how to make your own dartboard wall protector. Whether you choose to use a cork board, bulletin board, or frame, you can be sure that your darts will be safe from errant throws. So get out there and start playing!
